A500C · Ø6–40 · 6–12 m · GOST 34028-2016
A500C rebar
Weldable grade 500 rebar to GOST 34028-2016, crescent rib pattern, Ø6–40 mm, from mills in China
Steel products · Chinese mills → Uzbekistan
Steel from the producing mill to your warehouse
Rebar, plate, coil, pipe, bars and structural sections. A contract with the mill rather than a trader; batch inspection before shipment; the mill test certificate and a photo-documented inspection report travel with the steel.
100 %of batches · mill inspection
0intermediaries · mill contract
2control points · mill and warehouse
Four questions every buyer asks
01
Will the site stop
The batch is planned to your schedule: grade, sizes and tonnage are agreed before the contract, and the batch is visible at every node of the route.
02
Genuine or substituted
The steel comes from the mill that rolls it. The heat number on the mill certificate is checked against the bundle tag at inspection.
03
Will the price surprise you
The price is quoted to your warehouse: steel, packing, delivery, customs paperwork. Terms are fixed in the contract before shipment.
04
Who is accountable
One bureau from finding the mill to the acceptance report. Defects confirmed by report are replaced: the producing mill supplies the replacement under its contract with the bureau.
Catalogue
Eight categories of steel
Every item comes with standards, grades and a size-and-weight table. If a size is missing, send your specification: mills roll to order.
RebarA500C, A400, HRB400E, HRB500E, ASTM Grade 60 · Ø6–57 mm · from mills in China
5 items
Sheet and plateHot-rolled, cold-rolled, galvanized, pre-painted, chequered, stainless
8 items
CoilHot-rolled, cold-rolled, galvanized, colour-coated and stainless coil, slit strip
6 items
PipesSeamless, welded, hollow section, galvanized, stainless, spiral-welded
8 items
Long productsRound bar, square bar, flat bar, hexagonal bar, wire rod and stainless round bar from mills in China
6 items
Structural sectionsI-beams, channels, angles and sheet piles to GOST and GB from mills in China
6 items
Wire and meshAnnealed tying and galvanized wire, welded and reinforcing mesh, chain-link fencing
5 items
Ductile iron pipesSocket pipes and fittings in ductile (spheroidal graphite) iron, DN80–DN1200
2 items
How we work
Five steps from specification to warehouse
The same procedure for any batch, from a single wagon of rebar to a plate line for structural steel.
Step 1
Specification
You send grade, sizes, standard and tonnage. We clarify tolerances, coating, length and packing exactly as the mill will record them.
Step 2
Producing mill
We select a mill that rolls this item itself rather than resells it. We agree the price to your warehouse and the contract terms.
Step 3
Mill inspection
Before shipment: thickness and diameter measurement, mill certificate checked against the heat number on the tag, marking, packing, weight. You receive a photo-documented report.
Step 4
Route of the batch
Wagon, container or road train, depending on tonnage and site. Customs and certification are handled by the bureau; you see where the batch is.
Step 5
Acceptance at the warehouse
Checked against the specification and weighed in your presence. The second control point closes the delivery with an acceptance report.
St3sp/ps · Q235B · t 1.5–100 · 1 500×6 000 · GOST 19903
Hot-rolled plate St3
Hot-rolled plate of ordinary-quality carbon steel for steel structures, tanks and machine building
St3sp · 09G2S · 15×15–300×300 · GOST 8639 · GOST 30245
Square hollow section
Closed square section for frames, trusses and fencing. Wall 1–12 mm, St3sp, 09G2S, Q235B, Q355B
No.5–40 · U / P · h 50–400 · St3sp5 / 09G2S · GOST 8240
Channel GOST 8240
Hot-rolled channel No. 5–40 to GOST 8240-97: U series with tapered flange faces and P series with parallel faces
20×20–200×200 · t 3–16 · St3sp / 09G2S · GOST 8509
Equal angle
Hot-rolled equal angle, legs 20–200 mm, thickness 3–16 mm, GOST 8509-93; equivalents to GB/T 706 and EN 10056
DX51D+Z · Z100–Z275 · 0.3–3 mm · width 1 000–1 500 · GOST 14918
Galvanized coil
Hot-dip galvanized coil DX51D+Z with zinc weight Z100–Z275, 0.3–3 mm thick, for profiled sheeting, ventilation and profiles
St3sp · Q235B · Ø57–530 · GOST 10704
Longitudinally welded pipe
Round pipe from strip with a high-frequency weld. Structures, fencing, low-pressure water and gas
HW · HM · HN · h 100–600 · Q235B / Q355B · GB/T 11263
Wide-flange H-beam
Hot-rolled H-section with parallel flange faces to GB/T 11263: HW, HM, HN series, the counterparts of Sh, K, B to GOST R 57837
Calculator
Steel weight
Theoretical weight at 7.85 g/cm³. Works both ways: metres to tonnes and tonnes to metres. Weight calculator →
—kg per metre
—total, t
—metres per tonne
Formula ·
Documents
What arrives with the batch
Steel without papers is steel without provenance. The set is assembled at the mill and in the bureau before shipment.
01
Mill test certificate (MTC)
Heat number, chemical composition, mechanical properties, standard. Checked against the bundle tag at inspection.
02
Inspection report with photos
Measurements, marking, packing, weight, bundle numbers. Drawn up at the mill before shipment.
03
Specification and packing list
Items, sizes, quantity and weight per bundle: what the warehouse acceptance is checked against.
04
Certificate of origin
Confirms the mill and country of manufacture for customs clearance.
05
Customs clearance
Declaration, HS codes and certification in Uzbekistan are handled by the bureau.
06
Acceptance report
Drawn up at your warehouse against the specification and scale weight. Closes the delivery.
Industries
Where this steel goes
Construction and precast concrete
Rebar, mesh, wire rod, plate
Steel structures and hangars
H-beam, channel, angle, hollow section, plate
Machine building and repair
Round, square, flat and hex bar, cold-rolled sheet
Power and boiler plants
Seamless pipe, boiler plate, stainless steel
Oil, gas and pipelines
Seamless and spiral-welded pipe, 09G2S plate
Water utilities
Ductile iron pipe and fittings, galvanized pipe
Roads and bridges
Rebar, sheet pile, H-beam, road mesh
Agriculture and greenhouses
Galvanized hollow section, coated sheet, mesh
Standards
GOST, GB, ASTM and EN side by side
Chinese mills roll to GB; specifications in Uzbekistan use GOST. Grade equivalence is written into the contract rather than assumed.
| GOST | GB (China) | ASTM | EN | Used for |
|---|---|---|---|---|
| St3sp / St3ps | Q235B | A36 | S235JR | general structural steel |
| 09G2S | Q345B / Q355B | A572 Gr.50 | S355JR | low-alloy for loaded structures |
| A500C | HRB500E | Grade 75 (520) | B500B | ribbed reinforcing bar |
| Steel 20 | 20# | A106 Gr.B | P235GH | seamless pipe, boilers, machine parts |
| Steel 45 | 45# | 1045 | C45 | shafts, axles, fasteners |
| 08ps / 08kp | SPCC / DC01 | A1008 CS | DC01 | cold-rolled sheet |
| 08Kh18N10 | 06Cr19Ni10 | 304 / 304L | 1.4301 / 1.4307 | general-purpose stainless steel |
| 12Kh18N10T | 06Cr18Ni11Ti | 321 | 1.4541 | titanium-stabilised stainless steel |
| Ductile iron, GOST ISO 2531 | GB/T 13295 | A536 | EN 545 / ISO 2531 | ductile iron water pipe |
Equivalents are the closest match, not identical: chemistry and tolerances differ between standards. The exact grade and standard are written into the contract.
Questions
What is asked before the first batch
What is the minimum batch
The batch is sized to your volume and site. Send a specification with tonnage and we will quote it and advise how to assemble it: wagon, container or road train.
Why are there no prices on the site
Steel pricing depends on grade, size, tonnage, delivery terms and the exchange rate on the day of contract. A number on the page would be wrong by the time you read it.
How does mill supply differ from the market
In three ways. Provenance: steel with a heat number on the certificate, not “the same kind”. Price: no links between the mill and you. Accountability: defects confirmed by report are replaced — the producing mill supplies the replacement under its contract with the bureau.
Can I order a size that is not in the catalogue
Yes. The catalogue shows common sizes; the mill rolls to specification. Non-standard length, thickness, coating or grade is agreed before the contract.
How does the inspection work
At the mill, before shipment: thickness and diameter measured with micrometer and calipers, the mill certificate checked against the heat number on the tag, marking, packing and weight verified. You receive a report with photographs of every bundle.
What if the steel arrives defective
Defects confirmed by report are replaced: the producing mill supplies the replacement under its contract with the bureau. The bureau pursues it; you never deal with the mill.
Price request
Send your specification and we will quote your batch
Steel pricing depends on grade, size, tonnage and delivery terms on the day of contract. A number on the page would be wrong by the time you read it.
Request received