HRB400E · Ø6–50 · 9–12 m · GB/T 1499.2-2018
HRB400E rebar
Hot-rolled seismic grade 400 rebar to GB/T 1499.2-2018, Ø6–50 mm, the standard product of mills in China
HRB500E · Ø6–50 · 9–12 m · GB/T 1499.2-2018
HRB500E rebar
Hot-rolled seismic grade 500 rebar to GB/T 1499.2-2018, Ø6–50 mm, the nearest equivalent of A500C
GB/T 1499.2-2018HRB500EHRB500
Parameters
| Parameters | |
|---|---|
| Grade | HRB500E, HRB500 |
| Diameter | 6–50 mm |
| Length | 9 m and 12 m, other lengths 6–12 m to specification |
| Yield strength | from 500 N/mm² |
| Tensile strength | from 630 N/mm² |
| Seismic requirements (E) | Rm/ReL ≥ 1.25; ReL actual/nominal ≤ 1.30; Agt ≥ 9 % |
| Carbon equivalent | ≤ 0.55 % |
Sizes and weight
| Ø, mm | Weight, kg/m | Metres per tonne |
|---|---|---|
| 6 | 0.222 | 4 505 |
| 8 | 0.395 | 2 534 |
| 10 | 0.617 | 1 622 |
| 12 | 0.888 | 1 126 |
| 14 | 1.21 | 827.5 |
| 16 | 1.58 | 633.6 |
| 18 | 2 | 500.6 |
| 20 | 2.47 | 405.5 |
| 22 | 2.98 | 335.1 |
| 25 | 3.85 | 259.5 |
| 28 | 4.83 | 206.9 |
| 32 | 6.31 | 158.4 |
| 36 | 7.99 | 125.2 |
| 40 | 9.86 | 101.4 |
| 50 | 15.4 | 64.9 |
Theoretical weight at steel density 7.85 g/cm³. Actual batch weight is by scale and mill certificate.
Description
HRB500E is hot-rolled deformed reinforcing bar to GB/T 1499.2-2018 with a yield strength of 500 N/mm² or more and a tensile strength of 630 N/mm² or more. The E suffix sets the seismic requirements: the ratio of actual tensile strength to actual yield strength is not less than 1.25, the actual yield strength is not more than 1.30 times the nominal value, and the total elongation at maximum force Agt is not less than 9 %. Elongation A is 15 % or more. Moving from HRB400E to HRB500E at the same cross-section gives a higher design strength and allows the structural designer to reduce steel consumption.
It is rolled from microalloyed steel with vanadium or niobium; carbon up to 0.25 %, manganese up to 1.60 %, carbon equivalent up to 0.55 %. The strength is obtained by alloying and controlled rolling; a quenched ring across the section is not permitted. The rib pattern is crescent, and the mill designation, the grade figure 5E and the diameter are rolled into the bar. Weldability is by a procedure agreed with regard to the carbon equivalent; for welded cages the bureau requests welding test data from the mill.
During inspection at the mill the bureau checks the mill test certificate (MTC) for every heat — composition, carbon equivalent, tensile and bend tests, microstructure — against the bundle tag and the 5E marking on the bar. The core diameter and rib height are measured with a calliper and a micrometer, the weight of a one-metre sample on scales within the tolerance of the standard. Lengths, bundle strapping and tag legibility are checked; the result is an inspection report with photographs.
Applications
- columns and beams of high-rise frames
- raft foundations with dense reinforcement
- bridges and viaducts
- industrial structures under heavy loads
- projects to GB codes with grade 500
Packing and shipment
Bundles of 2–3 t strapped with steel band, mill tag with grade, diameter, heat number, length and weight; small diameters in coils as specified.
Grade equivalents
| GOST | GB (China) | ASTM | EN | Note |
|---|---|---|---|---|
| A240 (GOST 34028), A-I (GOST 5781) | HPB300 (GB/T 1499.1) | Grade 40 [280] | — | Plain round bar. Yield strengths differ: 240, 300 and 280 N/mm². |
| A400 (GOST 34028) | HRB400 / HRB400E | Grade 60 [420] | — | Nearest equivalents by yield strength of 400–420 N/mm². Grade 60 under ASTM A615 is not intended for welding. |
| A-III / A400 (GOST 5781, 25G2S, 35GS) | HRB400 / HRB400E | Grade 60 [420] | — | Nearest equivalent. Steel 35GS has limited weldability; HRB400 is rolled from microalloyed steel with a carbon equivalent of up to 0.54 %. The GOST 5781 rib pattern is herringbone, the GB pattern is crescent. |
| A500C (GOST 34028) | HRB500 / HRB500E | Grade 75 [520] | B500B | B500B (BS 4449, DIN 488 within EN 10080) is the equivalent by yield strength of 500 N/mm²; HRB500E and Grade 75 are the nearest equivalents. A500C is weldable, carbon equivalent up to 0.52 %. |
| A500C (GOST 34028) | HRB400E | Grade 60 [420] | B500B | Replacing A500C with HRB400E lowers the design strength and requires the reinforcement to be recalculated — only with the structural designer's approval. |
| A600 (GOST 34028) | HRB600 | Grade 80 [550] | — | Nearest equivalents: yield strength 600, 600 and 550 N/mm². |
Equivalents are the closest match, not identical: chemistry and tolerances differ between standards. The exact grade and standard are written into the contract.
Related items
A500C · Ø6–40 · 6–12 m · GOST 34028-2016
A500C rebar
Weldable grade 500 rebar to GOST 34028-2016, crescent rib pattern, Ø6–40 mm, from mills in China
Buyer questions
How to read a mill test certificate (MTC) for rebar
The certificate states the standard and grade, diameter, heat number, chemical composition of the heat with the carbon equivalent, tensile test results (yield strength, tensile strength, elongation) and bend test results, weight and number of bundles. The heat number on the certificate is checked against the tag on every bundle and the rolled-in marking on the bar — this is the link between the document and the metal. The bureau's inspector makes this check at the mill before shipment and attaches the certificate to the inspection report.
How A500C differs from A400 (A-III) and from HRB400E
By yield strength and by how the strength is obtained. A400 under GOST 5781 is hot-rolled from low-alloy steel 25G2S or 35GS, yield strength from 390 N/mm², herringbone rib pattern. A500C under GOST 34028 is as a rule thermomechanically strengthened low-carbon steel, yield strength from 500 N/mm², weldable, crescent rib pattern. HRB400E under GB/T 1499.2 is hot-rolled microalloyed steel, yield strength from 400 N/mm², with seismic ductility requirements. The grade for a project is set by the structural designer; the bureau selects a mill for the specified grade.
How the tonnage of a batch is calculated
A specification in metres is converted to tonnes by theoretical weight: the weight per metre equals 0.006165·d², where d is the nominal diameter in millimetres. The weight tables on the product pages are built on this formula at a steel density of 7.85 g/cm³. Shipment and acceptance are by actual weight as recorded on the mill's certificate and packing list; the deviation of actual weight from theoretical is limited by the tolerance of the standard.
What the bureau's inspector checks at the mill before shipment
That the batch matches the order by standard, grade and diameters; nominal diameter and rib height with a calliper and a micrometer, the weight of a one-metre sample on scales; the rolled-in marking on the bar and the tag on the bundle — grade, diameter, heat, mill; the mill test certificate for every heat; packing and strapping of bundles. The result is an inspection report with photographs. Rejects recorded in the report are replaced — the replacement is supplied by the mill under its contract with the bureau.
What the minimum batch is and whether several diameters can be combined in one shipment
The batch is sized to your volume — send a specification with grade, diameters, lengths and quantity for each item. Several diameters of one grade are collected at one mill into one shipment; where standards or grades differ, the bureau selects a mill that rolls all the required items or consolidates the shipment from two mills.
Price request
Send your specification and we will quote your batch
Steel pricing depends on grade, size, tonnage and delivery terms on the day of contract. A number on the page would be wrong by the time you read it.
Request received